Signal Time measurement with Picoscope

Post discussions on projects you are working on
Post Reply
Posts: 0
Joined: Mon Jul 11, 2022 9:48 am

Signal Time measurement with Picoscope

Post by Continental_Germany »

Hi Pico Community.

We use the Picoscope 5444D in our test HIL (Hardware in the Loop) stands und need a code example for Time measurement.

Can anyone recommend a Python SDK code file with this requirement? :roll:

1. Funktion A Trigger (Rising / Falling Edge Programmable)
2. Readout Delay to Channel B
3. Readout Level voltage of channel B at Trigger Time
4. Set Timebase
5. Set Voltage Resolution
6. Return Value [Time_A-B, Volt_B]

Best Regards

Post Reply