Both of your assumptions on the reasons are valid for our case. I only want to measure s21s in the system and it must be fast as possible

Hi, thank you but that is not the main problem here. I want only to measure s21 parameters, to do that I was loading thru cal. If there is any control for choosing the measurement parameters that would also work too.

In the default case, if I load SOLT calibration it measures all s parameters.

Hello, I am trying to control PicoVNA108 over python using pico5sdk. I want to measure only s21 parameters. While I was using Pico3 software I was able to load only thru calibration file and I could measure only s21s. However, if I try to load only thru cal file python script crashes with "Process ...

Hi, Is there any limitations on the trigger input signal besides the "External trigger considerations" in the User guide? Also, when i look at the user guide it says idle state should be bigger than 120ms to avoid communication problems. Is this valid for the save on trigger feature? should i wait ...

Hi, when i checked the documents i couldnt see any information about the adc of picovna 108. Can you share the specs such as number of bits, sample rate ..? And also for the Measure() function's "Raw" value, in the Programmer's Guide it says "Raw"value available for PicoVNA 108 only. If “Raw” is pas ...

Hi, I am currently working with Save On Trigger mode and I am wondering if I can sweep more than 1024 sweeps? If I cant, is it possible to use trigger mode without using Save On Trigger? In the optimum conditions ( fast pc and fast comm or slow trig) will this approach give same results as save on ...