PicoScope 7 and PicoScope 6 can both be installed on a PC, no need to uninstall.

You can download the latest PicoScope 7 software from

https://www.picotech.com/download/softw ... .19560.exe

and you will find a host of information in our Knowledge Base

https://www.picotech.com/library/knowle ... illoscopes

Do you own a PicoScope 6000 series device? if yes which one.

Can you give some indication of exactly what you are measuring, and what type of system it is?

We have a dedicated Automotive Forum here https://www.picoauto.com/support/index.php you may wish to post your question on there

Please repost to our dedicated Automotive Forum
https://www.picoauto.com/support/index.php

Please check these three sections in the software Maths_and_Measurements.png and the articles on our website https://www.picotech.com/library/knowledge-bases/oscilloscopes/maths-and-measurements New Maths and Measurements are being added on a regular basis so it is worth checking the latest Early ...

Have you tried using the Quadrature Serial Decoder?

Are you writing your own application? if yes what language are you using? or are you using our PicoScope 7 software?

I will then be able to give you the answer you need.

You need to set the probe up as PICO_CONNECT_PROBE_CURRENT_CLAMP_200_2KA as this will provide the power to the clamp and then chose a range as one of PICO_CURRENT_CLAMP_200A_2kA_1A = 4000, PICO_CURRENT_CLAMP_200A_2kA_2A, PICO_CURRENT_CLAMP_200A_2kA_5A, PICO_CURRENT_CLAMP_200A_2kA_10A, PICO_CURRENT ...

Yes the PicoScope 2204a will work with PicoScope 6 software.

When you setup your PC did you follow all of the steps in

https://github.com/picotech/picosdk-ni- ... /README.md

are you running the PicoScope 7 software, if so close this down and repeat your test.

For your device you will need these examples
https://github.com/picotech/picosdk-ni- ... er/ps6000a

Have you followed the steps here
https://github.com/picotech/picosdk-pyt ... /README.md

Once you have completed the steps the examples for the 5443D can be found here
https://github.com/picotech/picosdk-pyt ... 0aExamples

This is for a PT104 but the same applies for the CMS. Open PicoLog 6 and then on the picture of the device clcik the 3 dots, and then select Device Information which will bring up the following panel where you can set up the ethernet address for the CM3 Ethernet Setup.png Chose an address and port ...

This will need some detailed discussions to work out what functionality you are using with the PicoScope 6402C as both devices will need to use their own API interface. Can I ask that you email the support team directly on support@picotech.com with further details including the programming language ...